Large Vinyl Stickers (Printed Signs and Custom Vinyl Stickers)
Large Vinyl Stickers Are Perfect For
Point Of Sale Signage
Custom full colour self-adhesive vinyl sticker are perfect for marketing and promotion. You can customise your design to create the size of stickers you need for your advertising purposes. Use for promotional stickers, events, trade-shows, marketing and sales, giveaways, or anything else you can think of. Let you imagination run wild as you design the perfect vinyl sticker to suit your needs.
A high quality 100 micron, white self-adhesive vinyl sticker will be printed on our large format latex eco friendly HP machine, giving you high quality, vibrant vinyl sticker to display.
Tips For Designing Large Vinyl Stickers
Go Big – Size matters, choose the largest size, that will suit your needs, for the biggest impact
Select Your Theme
Choose A Layout – One that gives you plenty of space for your message
Use Bold Colours
High Contrast Colours For Readability
Keep It Simple – Don't overwhelm with too much information
- Use Your Company Logo – build brand recognition
Fitting Application Video
Please click on the picture below
Applying Sign Vinyl Decals
The following is a recommended method for accurately aligning and applying sign vinyl decals.
1 Apply a 50mm tab of masking tape to fix each end in place horizontally. Apply a third strip of masking tape vertically across the centre from top to bottom; the tape should extend above and below the decal and fix it to the substrate.
2 Start with the right hand side of the decal and cut or tear the 50mm strip of masking tape, leaving half on the substrate. Turn the right hand side of the graphic back on itself. Peel away the silicone release liner, cutting it at the centre point where the vertical masking tape fixes the decal to the substrate, and discard. When peeling decals away from the silicone release liner always try to keep them as flat as possible and peel back the release liner towards you. This will reduce the chance of damage to fine details or serifs.
3 The first half of the decal can now be lightly applied by holding it taught and using the two parts of the 50mm masking tape tab to align it perfectly. Squeegee down firmly.
4 Remove the vertical strip of masking tape and repeat for the left hand side of the decal.
5 Finally remove the application tape by peeling away at 45° to the direction of the text and 180° to the surface.
6 Air bubbles can be removed by puncturing with the tip of a scalpel.
7 This method of application can be modified for large graphics (in excess of 2m). Apply vertical strips of masking tape at two, three or more intervals. Cut the graphic half way between these points to form smaller panels and proceed as described above.